Next up is the marsh that will be fielded as Khemri Quicksand. As I've not built anything like this before I wasn't sure how it would turn out. I built a basic foam pond followed by texture and paint. I then flocked the rim and sealed the pieces. Next I built up the pond using thin layers of Envirotex resin. On the final layer I added some organic debris to obscure the surface of the pond and make it easier for a solider to mistake it for a bit of wet, open ground. I started with thin strips of Army Painter poison Ivy that I ripped from a bigger pieces. I stretched each piece out and pushed then into the wet resin with tweezers along the edge of the bank where the debris would be the thickest. I took some additional pieces of poison ivy and rolled it between my fingers over the surface of the pond. This removed most of the "leaves" from the poison ivy which then fell into the marsh. Finally I then added some leaf scatter from PK-Pro. I mainly used the green scatter but added a few of the light brown scatter to break up the color a bit.
Well, that is the final two pics of terrain for the Empire table. In the final installment I will share some pix of the final table all setup at MWR.
2 comments:
Really nice tower! I am not 100% sold on the pool, seems too high. Maybe more like a hill with a pond on it than a swamp or such. Still perfect for a game though.
Agree on the pond. Would look a lot better if is was half the height.
Post a Comment